Product Details

• Gauge Supports multiple probes
  Automatically identifies substrate type and activates appropriate measuring procedure
  Scan mode enables continuous measurement
  Automatic identification of probe type used
  Supports units µm and mils
• Memory Large data memory for 100,000 readings, 1,000 selectable files, Free choice of filename
  Saved readings and statistical values individually recallable
• Data Output Data transfer via USB 2.0 und Bluetooth 4.0
• Statistics Single and block value, selectable block size Parameter: n, x¯, s, Min, Max, Kvar, cp, cpk
• Calibration Factory, Zeroing (1-point calibration),
  Zeroing and foil calibration (2-point calibration),
  Two-foil calibration,
  Zero offset: addition/subtraction of a constant value to/from the reading
• Protection class Protection class - IP 52 (proof against dust and dripping water)
• Display High resolution Color display
  Backlight, 4-digit alphanumeric
• Standards DIN, ISO, ASTM, BS
• Measuring Principle Magnetic induction principle (F-Mode)
  Eddy-current principle (N-Mode)
• Limit values Freely selectable; optical and acoustic signal if limit value is exceeded
• Accuracy Please refer supported probes
• Resolution Please refer supported probes

Supported Probes

FN 0.2

• Range 0 - 200 µm for Iron/Steel (FN & F models)
  0 - 200 µm for Non-Ferrous metals (FN and N Models)
• Substrate Ferrous and Non-Ferrous
• Tolerance ± (0.7 µm + 1 % of reading)
• Resolution 0.1 µm or < 0.2 % of reading
• Min. Area ofmeasurement 5 mm x 5 mm
• Minimum radius of curvature Convex 1.5 mm, Concave 5 mm
• Minimum thickness of substrate Iron/Steel: 0.2 mm
  Non-ferrous metals: 50 µm
• Surface Temperature -15 °C to 60 °C

FN 1.5, F 1.5, N 1.5, FN 1.5/90

• Range 0 - 1,500 µm for Iron/Steel (FN & F models) 0 - 1,500 µm for Non-Ferrous metals (FN and N Models)
• Substrate Ferrous (FN/F)and Non-Ferrous (FN/N)
• Tolerance ± (1 µm + 1 % of reading)
• Resolution 0.1 µm or < 0.2 % of reading
• Min. Area ofmeasurement 5 mm x 5 mm
• Minimum radius of curvature Convex 1.5 mm, Concave 5 mm
• Minimum thickness of substrate Iron/Steel: 0.2 mm (FN and F Model)
  Non-ferrous metals: 50 µm (FN and N Model)
• Surface Temperature -15 °C to 60 °C
• Minimum ID for measurement (for FN 1.5/90) 12.5 mm

FN 3.5, F3.5

• Range 0 – 3,500 μm - For Iron/Steel
  0 – 3,000 μm - For Non-Ferroussubstrates
• Accuracy ± 3 μm or ± 3 % of reading (whichever is greater)
• Resolution 1 μm for 0 to 1,000 μm
  2 μm for 1,000 to 2,500 μm
  5 μm for 2,500 to 3,500 μm
• Min radius for convex surface 5 mm
• Min radius for concave surface 50 mm
• Min measuring area 10 mm X 10 mm

F10

• Range 0 – 10 mm - For Iron/Steel
• Accuracy ± 10 μm or ± 3 % of reading (whichever is greater)
• Min radius for convex surface 5 mm
• Min radius for concave surface 50 mm
• Min measuring area 10m X 10 mm

Catalogue Download Get Quote